Site selector data visualization tool

The following is an interactive data report containing water quality data from samples taken by the Colorado State University (CSU) Agriculture Water Quality Program (AWQP) at a location selected by the user when running the script (reported below). For more information, please contact A.J. Brown at Ansley.Brown@colostate.edu or visit the CSU AWQP Website at https://waterquality.colostate.edu.

Please Note: All analytes are reported in mg/L EXCEPT selenium (reported in ug/L), specific electrical conductivity (EC; mS/cm), and pH (log H).

Special Notes

• All “0” values reported are non-detects (ND) reported by ALS
• Total suspended solids (TSS), Electrical Conductivity (EC), and pH are performed by AWQP staff at CSU, whereas all other analytes are reported by ALS Laboratories
• Methods used to derive each analyte can be found in the Raw Data table in the “method” column

Location Selected: Kerbel.

CSV Export of selected site data saved as:

site_selector_temporary_results/Kerbel_data_2023-11-02.csv

Interactive Violin Plot

Use the below boxplot to graph various water analytes stratified by sample type (i.e., Inflow, Outflow, etc.). Analytes can be selected by using the dropdown menu on the top left of the graph. Hover over points with your mouse for additional information.

PLEASE NOTE: This initial graph will be incorrect (ongoing bug), use the dropdown menu to select a different analyte first, then go back to the initial analyte to see it displayed correctly.

To save your plot as a PNG: hover over the top right corner and click the camera icon. The PNG will be saved in your downloads folder.

Interactive Scatterplot Time Series

Use the below boxplot to graph various water analytes stratified by sample type (i.e., Inflow, Outflow, etc.) as a time series. Analytes can be selected by using the dropdown menu on the top left of the graph. Hover over points with your mouse for additional information.

PLEASE NOTE: This initial graph will be incorrect (ongoing bug), use the dropdown menu to select a different analyte first, then go back to the initial analyte to see it displayed correctly.

To save your plot as a PNG: hover over the top right corner and click the camera icon. The PNG will be saved in your downloads folder.

Scatterplot Matrix of All Numerical Analyte Data

Use the below scatter matrix to look at potential relationships between numerical variables.

Static Bar Plot

Raw Data

Use the table below to look at raw values.